1995 - 1998 Ford Windstar Van T-One Vehicle Wiring Harness with 4-Pole Trailer Connector - Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese. Provides a 4-pole flat trailer connector for the Ford Windstar. Quick and Easy. No Cutting, Splicing or Taping. Just plug in the T-One Connector and you are ready to tow. Solid 1piece construction. 16gauge bonded wire with 4-flat plug. Factory Appearance. Simple Do-It-Yourself Instructions on every package. Can be used with 5-pole, 6-pole or 7-pole adapters. INSTALLATION: Connection points are located behind the Ford Windstar taillights. The 4-pole trailer connector will be stowed in the jack storage compartment inside the Ford Windstar. TIP: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion. WARNING: Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or: Maximum stop/turn light: 1 per side (2.1Amps). Maximum tail lights: (4Amps). Fits: 1995 - 1995 Ford Windstar. 1 per package.