2 inch Flexible Prismatic Conspicuity Markings Tape - 3Ms Flexible Prismatic Conspicuity Marking tape (Series 963) is a highly reflective tape that is pre-coated with an aggressive, pressure sensitive adhesive that will work for application to most clean, dry, wax-free, non-corroded, weather resistant surfaces. The adhesive is protected by an easy-release liner. This tape is intended to be applied to the side and rear perimeter of vehicles in a continuous stripe to enhance visibility and recognition by motorists. It can be applied to flat surfaces (with and without rivets) and non-compound curved surfaces with a radius greater than 5 inches. For application to corrugated vehicles, apply the marking to the bottom and top rails or between corrugations if adequate flat surface is available. Application is not recommended to rusted or corroded metal, loose or chalking paint, irregular shaped framework, bolts, rivets larger than 1/2 inch high, support plates, corrugations, within 1/8 inch of door hinges, exterior posts, weld joints, the end of the vehicle surface, or within 3 inches of mandated lights, reflectors, or turn signals. This reflective tape consists of alternating bands of 11 inches red reflective material followed by 7 inches of white reflective material. Red and White in color. Product is Sold By The Foot. Dimensions: 2 inch Wide x By the Foot.